How To Clean As Well As Protect Your Running boards?
Running boards make any vehicle simpler to access and look tough. Like other car parts, they need regular maintenance to stay in good shape. Cleaning and maintaining running boards improve their look and lifetime. If you are looking for a credible platform to avail the best quality running boards, look no further than MyTruckpoint.
Keep your running boards looking and working well with these step-by-step instructions:
Supplies needed:
· Car detergent or mild soap
· Water Soft-bristle brush or sponge
· Microfiber clothes
· For metal running boards, wax or sealant
· Protective UV coating for plastic or rubber running boards
Step 1: Wash Off Dirt and Debris:
Rinse your running boards to remove loose dirt and grime. This initial rinse reduces surface scratching while cleaning. Wet the running boards with a hose or bucket.
Second, use soap or detergent
Mix mild vehicle soap or detergent with water per the package recommendations. Avoid strong chemicals that might harm running board finishes. Scrub the running boards only using a soft-bristle brush or sponge in soapy water. Focus on tough dirt and filth.
Gently scrub Step 3
Scrub running boards with a gentle brush. This brush cleans without scratching. Avoid material damage by working in tiny pieces with mild pressure. Get into all the dirt-accumulating grooves and patterns on textured running boards.
Step 4: Thoroughly rinse
Rinse running boards completely with clear water to eliminate soap residue after scrubbing. Leftover soap can smear and attract dirt. Rinse soap-dripped surfaces beneath and around running boards.
Step 5: Dry Running boards
Dry running boards fully with a microfiber towel. Microfiber absorbs well and leaves less lint and scratching than ordinary towels. Drying running boards, especially metal ones, prevents wet marks and streaks.
Step 6: Wax or Seal Metal Running boards
A coat of automotive wax or sealant helps preserve metal running boards. Stick to the wax or sealant directions. A microfiber cloth should be used to rub a tiny amount of product into the running boards in a circular motion. After drying to a haze, buff with a clean microfiber cloth.
Step 7: UV Protect Plastic or Rubber Running boards
UV protectant sprays help plastic and rubber running boards. This product prevents sun-fading and cracking. Spray and wipe off extra UV protectant using a microfiber cloth, following package directions.
Step 8: Regular Care
Clean your running boards regularly to maintain them. Your driving circumstances and temperature may require more regular cleaning. More regular cleaning will avoid corrosion or damage if you drive off-road or in winter weather with salt on the roads.
Longevity Tips
· Avoid Harsh Chemicals: Cleaning chemicals might harm running boards. Use mild soap and water to clean regularly.
· Check Regularly: Running boards should be checked routinely for damage or wear. Early diagnosis of corrosion or fractures can avert worse complications.
· Protect from the Elements: If you live in a tough climate, consider coverings or treatments to protect your running boards.
Key Takeaways!
Following these measures will keep your running boards functioning and appealing for years. Regular cleaning and protection improve your vehicle's appearance and running board performance.
Comments
Post a Comment